Description
The MSB-200-D and the MSB-500-D both have a 15″ square foot print and are well suited for bench top laboratory use as well as easy portability for use in the field. Fluid immersion depths of over 12″ make these units suitable for comparison calibrations of SPRT’s, industrial thermometers, and thermocouples in a wide temperature range (MSB-500-D 190° C to 500° C) (MSB-200-D ambient to 200° C) – all in a bench top instrument. The MSB line of calibrators offer a short neck distance of 2.1″ from the top of the neck to the actual fluid. This short neck distance allows you to get your shorter sensors into the bath easily. And, the good vertical uniformity in these baths makes it easier to perform calibrations with all of your shorter sensors.
An intuitive touch screen allows for easy bath control, some prefixed points are included for simple, fast and reliable setups. Communication to a computer is easily accomplished through the use of an RS232 port on the side of the bath. Communication is typically accomplished through the use of a simple USB interface plugged into the host computer. I-Tools is an easy to use program that allows for full bath control. These calibrators feature impressive start up times; heating from ambient to 200° C in only about 90 minutes. Because of the fast heat up times, you can perform more calibrations. With this easy to use bath, heating rates greater than 2.6° C per minute allow the user to calibrate numerous points throughout the day; less than 75 minutes from 200° C to 400° C.
The tank on these baths is large enough to accommodate an optional high temperature equalization block which can further improve the stability and uniformity. Our high temperature equalization blocks are made from Stainless Steel and are customized when needed. The typical block will have five or more fluid filled sensor wells, and is typically > six inches deep. For the MSB-200-D equalization blocks are available in Brass and Copper as well as Stainless Steel.
